For well plates, cap mats for long-term storage, (pre-) pierced fully compatible with your (semi- or automated) systems are available. Please also note our 3M seals and foils in the ‘read more’ section and the microplate seals for our cappers/sealers.

Besides Cap Mats adhesive foils are widely applied:

  • Adhesive plate seal with high organic resistance (DMSO, MeOH, AcCN)
  • Embossed surface for easy piercing
  • Easy Sealing & Removable
  • Resealable EPS Seal Solvent Resistant
  • No needle clogging
  • No stickiness to needles of autosamplers
  • Easy piercing and peeling off
  • No residual adhesive on micro plates after peeling off
  • High airtightness
  • No cross contamination between wells
  • Thermal stability between -80℃ and +80℃,
  • Suitable for HPLC, Cold storage, dry freezing.
  • Pre-cut type for manual sealing
  • Size:80mm×122mm
  • Material:Polyolefin, Synthetic adhesive

From 3M™ several Sealing Tapes are also available:

Aluminum Microplate Sealing Tape 9792

Material Description: Single coated tape consisting of a 1.4 mil “dead soft” aluminum backing coated on one side with a pressure sensitive acrylate adhesive. The tape is supplied on a brown paper release liner. Seals well to polypropylene, polystyrene, and polycarbonate microplates. Compatible with aqueous solutions and organic solvents. Suitable for use between -70ºC and 110ºC. Compatible with thermal cyclers. Minimal evaporation of microplate contents over use conditions. Minimal cross-well contamination. Easy to handle delivery system. Easy to pierce with a metal probe or plastic pipette.

Polyolefin Microplate Sealing Tape 9793

Material Description: Single coated tape consisting of a 2.0 mil polyolefin film coated on one side with a pressure sensitive acrylate adhesive. The tape is supplied on a white paper release liner. Seals well to polypropylene, polystyrene, and polycarbonate microplates. Compatible with aqueous solutions and organic solvents (DMSO). Suitable for use between -70ºC and 110ºC. Compatible with thermal cyclers. Optically clear properties for ease of read-through. Low auto-fluorescence. Minimal evaporation of microplate contents over use conditions. Minimal cross-well contamination. Easy to handle delivery system.

Advanced Polyolefin Microplate Sealing Tape 9795

Material Description: Single coated tape consisting of a 2.0 mil clear polyolefin film coated on one side with a clear pressure sensitive silicone adhesive. The tape is supplied on a white polyester release liner. Seals well to polypropylene, polystyrene and polycarbonate microplates. Compatible with aqueous solutions and organic solvents. Compatible with Real Time thermal cyclers. Suitable for use between -70ºC and 110ºC. Minimal evaporation of microplate contents over use conditions. Superior optical properties; best choice for visual microscopic analyses. Minimal cross-well contamination. Low auto-fluorescence. Easy to handle delivery system. Low tack to touch adhesive.

Sort by Name A - Z
100 per page
Showing 1 – 100 of 172 results Showing all 172 results Showing the single result No results found
Filters Sort results
Product
Description
Category
Quote Cart

Replacement Silicone Rubber Mat for Nano Nest

Cap Mats

Plate seal/mat, solid, 48-well, Santoprene, for 7 mL and 5 mL well storage plate volumes, 100/pk

Cap Mats

Plate seal/mat, pierceable, 96-well, Santoprene, for 2 mL well storage plate volumes, 100/pk

Cap Mats

Plate seal/mat, solid, 96-well, Santoprene seal/mat for, 2 mL well storage plate volumes, 100/pk

Cap Mats

Plate seal/mat, top and bottom, 96-well, Santoprene, for 2 mL fritted filter plate, 100/pk

Cap Mats

Plate seal/mat, pierceable, 24-well, Santoprene, for 10 mL well storage plate volumes, 100/pk

Cap Mats

EVA Sealing Cap, 96 square well to fit 219006, 219008 & 219009, DNase/ RNase free, inner of 1, 50 p

Cap Mats

Drain Cap Mat, seals base of plate, supplied standard with BioVyon Protein A plates, 25 p

Cap Mats

EVA Sterile Sealing Cap, 96 square fit 219025, 219026 & 219027, DN/ RNase free,inner of 1, 50 p

Cap Mats

Friction sealing cap mat PP square well for 219030/031, 50p

Cap Mats

EVA Sealing Cap, round well to fit 219002 DNase/ RNase free, inner p of 1, 50 p

Cap Mats

EVA Sterile Sealing Cap, round well to fit 219012, DNase/ RNase free, inner p of 1, 50 p

Cap Mats

Piercable Sealing Cap, round well to fit 219002, DNase/ RNase free, inner p of 1, 50 p

Cap Mats

Friction seal thermoplastic elastomer for low-profile deep well 1.1ml plate, 100p

Cap Mats

SealPlate Clear adhesive film for PP or PS plates, 100p

Cap Mats

Friction sealing Cap Mat for 96 round well plates standard silicone, 5 p

Cap Mats

Friction sealing Cap Mat for 96 square well plates standard silicone & vial storage plate, 5 p

Cap Mats

Friction sealing Cap Mat for 96 round well plate PTFE coated silicone, 5 p

Cap Mats

Friction sealing Cap Mat for 96 square well plate PTFE coated silicone, 5 p

Cap Mats

Friction sealing Cap Mat for 96 round well plates silicone sheet with thick PTFE coating, 5 p

Cap Mats

Friction sealing Cap Mat for 96 square well plates silicone sheet with thick PTFE coating, 5 p

Cap Mats

Disposable plastic vial rack with clear bottom for 13.75mm o.d. glas vialsx24, 5 p

Cap Mats

Glas Sheet, 74x110mmx175um for Krystal glas bottom plates, 100p

Cap Mats

EZ-Pierce easily pierced polyethylene, 100p

Cap Mats

AeraSeal Breatheable seal Rayon-Sterile, 50 p

Cap Mats

Clear strong peel seal foil on roll-design to be peelable, 600m

Cap Mats

Clear strong thermal seal on a roll-not designed for peeling, 600m

Cap Mats

Adhesive Sealing Film EZ-Pierce Zone-Free, 100p

Cap Mats

x-pierce pre-scored film 96 Well Round-sterile, 50 p

Cap Mats

x-pierce pre-scored film 96 Well Round, 100p

Cap Mats

Aluma Seal 96, 100p

Cap Mats

Aluma Seal CS, 100p

Cap Mats

Absorb MAX light blocking film, 50 p

Cap Mats

Thermal Seal RT2RR, 100p

Cap Mats

Replacement Films for 24-well Parallel Synthesis Block Assembly, 25p

Cap Mats

Top Mats for 24253 (Photoredox 24-Well Block Assemblies), 25p

Cap Mats

Bottom PFA Films for 24 Well Photoredox; for 8x30mm Vials, 25p

Cap Mats

Bottom Rubber Mats for 24 Well Photoredox; for 8x30mm Vials, 25p

Cap Mats

24- well clear silicone cap mat, 5 p

Cap Mats

Advantage 2mL Pierceable Cap Mat with in xin on Surface, PP, 20p

Cap Mats

Advantage Resealable PFTE/Silicone Square 96 Well Cap Mat, 5p

Cap Mats

Advantage Resealable Pre-Scored PTFE/Silicone Square Well Cap Mat, 5p

Cap Mats

Pierceable Santoprene 48 well sealing cap for 360002 /360004, 100p

Cap Mats

Piercable Santoprene, 96 square well sealing cap to fit 219006, 219008 & 219009, 100p

Cap Mats

Pierceable Santoprene 24 well sealing cap to fit 360013, 100p

Cap Mats

Silicone 48 well solid plate seal, 7.5ml, 5ml, 100p

Cap Mats

Silicone Sealing Cap to fit 384 well plates, 219040 and 219041, 50 p

Cap Mats

Cap Mat, EVA Ethyl Vinyl Acetate, Round Well for 1mL MasterBlock, 10 per bag, 50p

Cap Mats

Cap Mat, EVA Ethyl Vinyl Acetate, Square Well for 2mL MasterBlock, 10 per bag, 50p

Cap Mats

EVA Sealing strip, 8 square well to fit 219006, 219008 & 219009, DNase/ RNase free, 300 p

Cap Mats

Spare plate weight to hold film down during sealing-for RECEsED plates only, 1p

Cap Mats

Silicone impact support mat for 219009 & 219027 2ml square plates replaces 228019, 1p

Cap Mats

Gas Permeable Moisture barrier Clear Seal, cut to 96-well pattern, 50 p

Cap Mats

Gas Permeable Moisture barrier Clear Seal, cut to 384 well pattern, 50 p

Cap Mats

Silicone impact support mat for 219008 & 219026 1ml square plates replaces 228018, 1p

Cap Mats

Silicone cap mat piercable, round well with double O-ring to fit 219020/021 Common wall plate, 50 p

Cap Mats

Silicone impact support mat for 219020 & 219021 2ml round plates, 1p

Cap Mats

Silicone cap mat piercable, square well with double O-ring to fit 219009/027 storage block, 50 p

Cap Mats

Silicone impact support mat for 360004 large volume plates, 1p

Cap Mats

TPE cap mat piercable, round well with double O-ring to fit 219020/021 Common wall plate, 50 p

Cap Mats

Closing mats for 96-well plates, 50p

Cap Mats

Polyethylene peeling cover film, PE, 100p

Cap Mats

Aluminum universal cover film, Al, 100p

Cap Mats

PP peeling cover film, PP, 100p

Cap Mats

Gas permeable peeling film, 50p

Cap Mats

Sealing mat 0.5-1.0mL 96-wellplt TPE 50p

Cap Mats

Sealing mat 2.0mL 96-well plate EVA 50p

Cap Mats

96-well-Cover mat, TPE non-steril, 100p

Cap Mats

1.2ml 96-well-Cover mat, TPE, 100p

Cap Mats

2.2ml 96-well-Cover mat, EVA, 50p

Cap Mats

Advantage 96 Wide Mouth Round Shallowplug Silicone/ PTFE Cap Mat, 5p

Cap Mats

Advantagepre-Slit 96 Wide Mouth Round Shallowplug Silicone/ PTFE Cap Mat, 5p

Cap Mats

Kapton seal 1p

Cap Mats

96-well pierceable Cap Mat, Clear PTFE/Orange Silicone Lined, for Crimp Top or Flanged Inserts in MicroPlates, 1p

Cap Mats

Advantage Autosampler Compatible 1mL Cap Mat with in xin on Surface,polypropylene, 20p

Cap Mats

96-well pierceable Cap Mat, Clear PTFE/Orange Silicone Lined with Slit, for Crimp Top or Flanged Inserts in MicroPlates, 1p

Cap Mats

Advantage 10 mil Adhesive Silicone Sealing Mat, Round 96-well , 5p

Cap Mats

Advantage 2mil, 96 Square-wellpattern, Ultra Thin, Teflon Adhesive Sealing Film, 0.002in, 100p

Cap Mats

Advantage 2mil,pre-Slit, 96 Square-wellpattern, Ultra Thin, Teflon Adhesive Sealing Film, 0.002in, 100p

Cap Mats

Advantage 2mil, 96 Round-wellpattern, Ultra Thin, Teflon Adhesive Sealing Film, 0.002in, 100p

Cap Mats

Advantage 2mil,pre-Slit, 96 Round-wellpattern, Ultra Thin, Teflon Adhesive Sealing Film, 0.002in, 100p

Cap Mats

Round Clear Silicone/ PTFE Cap Mat for Lowprofile 1mL, 96-well Collectionplates, 5p

Cap Mats

Pre-Slit Round Clear Silicone/ PTFE Cap Mat for Lowprofile 1mL, 96-well Collectionplates, 5p

Cap Mats

Advantagepre-Scored Round Welled Cap Mats with Molded Silicone/ PTFE Liner for standard 96position Wells, 5p

Cap Mats

Advantage Round Welled Cap Mats with Molded Silicone/ PTFE Liner for standard 96position Wells, 5p

Cap Mats

Advantagepre-Slit Square Well Cap Mat with Molded Silicone/ PTFE Liner for standard Square 96position Wellplate, 5p

Cap Mats

Advantage Green 96 Well Silicone/ PTFE Square Well Cap Mat, 5p

Cap Mats

Molded Soft Silicone, 384-Well Square Well Cap Mat, 5p

Cap Mats

Clear Ultra Thin Round Well Cap Mat, Silicone/ PTFE, 5p

Cap Mats

Clear Ultra Thin Square Cap Mat, Soft Silicone/ PTFE, 5p

Cap Mats

Clear Ultra Thin pre-Slit, Round Well Cap Mat, Silicone/ PTFE, 5p

Cap Mats

Clear Ultra Thin pre-Slit, Round Well Cap Mat, Silicone/ PTFE, 25p

Cap Mats

Clear Ultra Thin pre-Slit Square Silicone/ PTFE Cap Mat, 5p

Cap Mats

Clear Ultra Thin pre-Slit Square Silicone/ PTFE Cap Mat, 25p

Cap Mats

Advantagepurple Ultra Thin Round Silicone Cap Mat, Soft Silicone/ PTFE, 5p

Cap Mats

Mighty Matpurple Ultra Thin Square Cap Mat, Soft Silicone/ PTFE, 5p

Cap Mats

Advantage purple pre-Slit Ultra Thin Round Cap Mat, Soft Silicone/ PTFE, 5p

Cap Mats

Purple Ultra Thinpre-Slit Square Cap Mat, Soft Silicone/ PTFE, 5p

Cap Mats

Advantage 96 Round Wide Mouth Silicone/ PTFE Cap Mat, 5p

Cap Mats

Advantagepre-Slit 96 Round Wide Mouth Silicone/ PTFE Cap Mat, 5p

Cap Mats
1 2